PN16 carbon Steel dismantling joints DJ-1003
Quick Details
Design: BSEN545 /ISO2531
Body: carbon steel ST37
Flange Spigot: Carbon steel
Retainer: carbon steel
Gasket: EPDM
Long Bolts: Dacromet steel bolts ?
Size: DN600 24”
?
Product Range:
Available material: GGG50,GGG40, ductile iron, carbon steel, stainless steel, duplex SS
Available gasket: EPDM, NBR
Optional Tie rods: Full bolts, half bolts
Bolts available for stainless steel 304, stainless steel 316, steel, Dacromet Steel.
Pressure Range:? PN10, PN16, PN25, 150LBS
Size Range: DN100-DN3000
?
Performance:
The dismantling joint is a double-flange joint, which can be adjusted longitudinally and locked with the provided bolts to the required length. The system can be used not only to quickly and easily maintain valves, pumps or instruments, but also to simplify future pipeline engineering corrections and reduce downtime when changes are needed.
Its installation is very simple, just use the wrench and torque wrench to tighten the high-strength steel or stainless steel rod. Since the tie rod has fewer holes than the flange, and the tie rod is used as a flange connection bolt, it can speed up the installation process, but it can still provide a safe, rigid, and fully end-loaded system whose rated pressure is equal to the rated pressure of the flange.
?
Application:
Sea water, fresh water, hot and cold water, drinking water, domestic sewage, crude oil, refined oil, air, gas, etc. working together with isolation valves to reduce the vibration in the piping system.
?
Available material: GGG50,GGG40, ductile iron, carbon steel, stainless steel, duplex SS
Available gasket: EPDM, NBR
Optional Tie rods: Full bolts, half bolts
Bolts available for stainless steel 304, stainless steel 316, steel, Dacromet Steel.
Pressure Range:? PN10, PN16, PN25, 150LBS
Size Range: DN100-DN3000
The dismantling joint is a double-flange joint, which can be adjusted longitudinally and locked with the provided bolts to the required length. The system can be used not only to quickly and easily maintain valves, pumps or instruments, but also to simplify future pipeline engineering corrections and reduce downtime when changes are needed.
Its installation is very simple, just use the wrench and torque wrench to tighten the high-strength steel or stainless steel rod. Since the tie rod has fewer holes than the flange, and the tie rod is used as a flange connection bolt, it can speed up the installation process, but it can still provide a safe, rigid, and fully end-loaded system whose rated pressure is equal to the rated pressure of the flange.
Sea water, fresh water, hot and cold water, drinking water, domestic sewage, crude oil, refined oil, air, gas, etc. working together with isolation valves to reduce the vibration in the piping system.
?
