WCB 600LBS 20inches big steel Gate Valve GVC-00600
Quick Detail:?WCB 600LBS 20inches big Gate Valve
Design standard: API 600
Body material: WCB.
Nominal diameter: 20”
Pressure: CL600LBS
End connection: RF flange
Face to face: ANSI B16.10.
Working temperature: -29℃~+425℃.
Mode of operation: Gearbox.
Test and inspection: API 598.
BB OS& Y Design valve
Bolted Bonnet Gate Valve
Bi-Direction Gate Valve
?
Products Range:
Available Material: Carbon steel, Stainless steel, Alloy steel
Optional stem/shaft: stainless steel F6A, Stainless steel304, stainless steel316L,
Optional seal/Seat: Stelite , STL, 2CR13, SS/ SDSS
Optional End connection: SW, BW, RF, RTJ, NPT
Optional Operation: Gearbox and handwheel, Electric driver, Pneumatic actuator.
Range of the size diameter: 1/2″~60″ (DN15~DN1500).
Range of the Rating: 150lbs~2500lbs (PN16~PN420).
Customized Design is negotiable.
?
Performance /OM:
?storage and maintenance
1 The valve should be stored in a dry and ventilated place indoors. The ports of the channel should be capped.
2 Valves for long-term storage should be inspected and cleaned regularly, especially the sealing surface of the valve seat to prevent damage and make sure the surface with anti-rust oil.
3 If the storage time exceeds 18 months, the valve should be tested and recorded before installation and use.
4 The valve after installation shall be inspected and repaired regularly. The main maintenance points include the following:
1) Sealing surface
2) Stem and stem nut
3) filler
4) Dirt on the internal surfaces of the valve body and bonnet
?
Application:
petroleum, chemical, Stem, Oil, Gas, Construction, electric power, metallurgy, environmental protection and energy systems
Available Material: Carbon steel, Stainless steel, Alloy steel
Optional stem/shaft: stainless steel F6A, Stainless steel304, stainless steel316L,
Optional seal/Seat: Stelite , STL, 2CR13, SS/ SDSS
Optional End connection: SW, BW, RF, RTJ, NPT
Optional Operation: Gearbox and handwheel, Electric driver, Pneumatic actuator.
Range of the size diameter: 1/2″~60″ (DN15~DN1500).
Range of the Rating: 150lbs~2500lbs (PN16~PN420).
Customized Design is negotiable.
storage and maintenance
1 The valve should be stored in a dry and ventilated place indoors. The ports of the channel should be capped.
2 Valves for long-term storage should be inspected and cleaned regularly, especially the sealing surface of the valve seat to prevent damage and make sure the surface with anti-rust oil.
3 If the storage time exceeds 18 months, the valve should be tested and recorded before installation and use.
4 The valve after installation shall be inspected and repaired regularly. The main maintenance points include the following:
1) Sealing surface
2) Stem and stem nut
3) filler
4) Dirt on the internal surfaces of the valve body and bonnet
petroleum, chemical, Stem, Oil, Gas, Construction, electric power, metallurgy, environmental protection and energy systems
