欧美.com,日韩中文字幕一区,亚洲精品中文在线

GRIP EPDM Repair Coupling

Short Description:

GRIP EPDM Repair Coupling
The plate patcher is suitable for the rapid repair of pipeline leakage.
It can quickly repair, install, and construct the aging and rust-making pipes with sand holes and fractures?without changing the pipeline. It does not require special tools. Can be construction operations.
The product has a wide range of applications, and it has low requirements for the circularity of the pipe and has strong versatility.

Request a quote

Feature

Products Range

Performance and OM

Application

Install Tips
1. Clean up the appearance of the pipe as thoroughly as possible.
2. Make a reference mark on the pipe. After the installation is complete, this mark can be used to check whether the patcher is accurately covered.
3. Use water, soapy water to lubricate the pipe, reduce friction and make the seal easier to install.
4. Clean and lubricate the bolts will reduce the friction so that the torque can be transmitted to the lock more easily.
5. Maintain a certain pressure in the pipeline so that the water will continue to flow and prevent foreign matter or pollutants from entering the pipeline.
6. The full-circle patcher can be easily installed to the damaged part and installed easily when the piping is fully lubricated.
7. Raising the water level above the pipeline will reduce the water spray. Patcher can be installed quickly and easily in water.
8. First tighten the middle bolt to prevent water spray.

Previous: Tooth Ring Pipeline Connector Pipe Repair Clamp

Next: High Pressure Leak Repair Clamps

1.flexible connectionFirmness and rot- resistance

2. Need no welding
3. Without fire danger
4. Saving space
5. No limit on a pipe
6. Non-stop plugging
7. Convenient installation

Install Tips
1. Clean up the appearance of the pipe as thoroughly as possible
2. Make a reference mark on the pipe. After the installation is complete, this mark can be used to check whether the patcher is accurately covered.
3. Use water, soapy water to lubricate the pipe, reduce friction and make the seal easier to install
4. Clean and lubricate the bolts will reduce the friction so that the torque can be transmitted to the lock more easily
5. Maintain a certain pressure in the pipeline so that the water will continue to flow and prevent foreign matter or pollutants from entering the pipeline.
6. The full-circle patcher can be easily installed to the damaged part and installed easily when the piping is fully lubricated.
7. Raising the water level above the pipeline will reduce the water spray. Patcher can be installed quickly and easily in water
8. First tighten the middle bolt to prevent water spray.

epdm repair clamp