Manufacturer of Dss Butterfly Valve - WCB API600 CLASS300 Gate Valve GVC-00300 – Deye

Quick Detail

Design standard: ANSI B16.34

Body material: WCB.

Nominal diameter: 12”

Pressure: CL300LBS

End connection: RF FLANGE

Face to face: ASME B16.10.

BB OS& Y Design valve

Bi-Direction Gate Valve

Working temperature: -29℃~+425℃.

Mode of operation: handwheel

Test and inspection: API 598.

Body test pressure: 7.5Mpa

Seat Test Pressure: 5.5Mpa.

?

Products Range:

Available Material: Cast steel. A216WCB, WCC, LCB, LCC, SS.

Optional stem/shaft: A182F6a, SS304, SS316, SAF2507 SAF2205

Optional seal/Seat:? STL, 2CR13, SS304, SS316 SDSS

Optional End connection: butt welding, RF, NPT, SW

Optional Operation:? Gearbox, Electric, Pneumatic actuator

Range of the size diameter: 1/2″~60″ (DN15~DN1500).

Range of the Rating: 150lbs~2500lbs (PN16~PN420).

Customized Design is negotiable.

?

Performance:

?Operation & Assembly

- Vertical orientation requirement of valves during operation, testing, and installation is prescribed to all gate valves.

?-?All gate valve operators must be assembled in the upright position vertically above the valve’s?centerline.

1. ?Gearboxes, actuators and necessary adapters must conform to the valve’s ISO pad top works design
2. ? Adapter plates and gears must be bolted to the valve top works plate using the correct bolt size, torque, and tightening pattern.
3. The stem must be protected at all times from unnecessary movement, stress, force or other potential damage while ensuring the stem remains centered in the yoke tube during installation
4. Automation mechanisms must be designed, assembled, and supported in a manner as to not exert
5. uneven or unbalanced forces on the valve assembly that could contribute to a side load condition.